(6-A) Live Mode On Screen Type - Panasonic Arbitrator-CP Reference Manual

[SIMPLE]
[DETAILS]
(8)
(9)
(10)
(11)
(12)
*If setting on screen type "AUTO" and (1), (2) or (3)
is changed, "SIMPLE" on screen type will be
appeared on screen for 3 to 5 seconds.

(6-a) Live Mode On Screen Type

(2)
(5)
(2)
(5)
(1) Remaining P2 card recording time
(1)
(2) Mode indication (
(3)
(4)
(3) Status Display
PON: Power On Recording "ON"
CARD FULL: No space on P2 card
CARD PROTECT: The write-protect switch of P2 card is set to protect
VUP CARD: Recording is not possible due to P2 card intended for
version upgrade
UNFORMATTED: P2 card is not formatted
REFORMAT: P2 card needs to be reformatted
ILLEGAL CARD: An unusable card is inserted in VPU
(6)
NO CARD: No P2 card is inserted in VPU
(7)
RUNDOWN: P2 card is closed to the end of its service life
(4) Remaining P2 Card capacity bar
(5) "Restore" appears only when there is a file that needs to be restored
(1)
(6) Mark Position
(3)
(7) VPU set up Status
(4)
C1: Camera 1 selected
IR: Camera IR mode is "ON"
BL: Camera backlight is "ON" TAL: Camera lamp is "ON"
LOCK: Control Panel Key Lock is "ON"
(8) Speed (MPH/KPH): OWN-own vehicle speed, TGT-target vehicle speed
*Target vehicle speed depends on the type of radar gun that is connected
(6)
(9) Location information (latitude)
(7)
(10) Location information (longitude)
(11) Date/Time
(12) Trigger input status: GPIO 1 to 8 are displayed in order from the left.
The letters assigned by "Printable" appear when the "Detection" occurs
Pause, Record)
Bookmark position
C2: Camera 2 selected
IRA: Camera IR mode is "OFF"