JVC XV-S200BK Instructions Manual page 42

/i
40
Initial settings
SUBTITLE
You can select the default subtitle language to be
displayed if it is contained on the disc.
Each time you press
CURSOR =-, the language
setting changes in the
following order:
aENUL_NGUAGE
_UO_ LANGUAGE
8UallTL_
O_ SC_ L.e_GL_£E_
I pF_S8<, _ I
ENGLISH -> SPANISH -> FRENCH -> CHINESE ->
GERMAN -> ITALIAN -> JAPANESE -> language code
from AA to ZU
(See "Appendix A: Table of languages and their
abbreviations" at the end of this manual.)
Pressing CURSOR 4 changes the language setting in the
reverse order of the above.
* If the selected language is not recorded, the disc's
default subtitle language will be displayed.
ON SCREEN LANGUAGE
You can select the on-screen display language to be
displayed.
Each time you press
CURSOR =-, the language
setting changes as follows:
"E"O_U'_E _ I
.... _,L
ON 8¢_:r1 L4_m_UA__
[P_ ]1
ENGLISH
ESPA o-csp.nI,h)
FRANCAIS (French)
English [ ON SCREENLANGUAGE _1 ENGLISH I[_]
Spanish [IDIOMAENPANTALLA _1 ESPAI_IOL I_> ]
French [LANGUED'ECRAN <_1 FRANCAIS I_>]
Pressing CURSOR 4 changes the language setting in the
reverse order of the above.
DIGITAL AUDIO OUTPUT
To connect the unit's digital
output to an external device
equipped with a digital input,
this item must be set
correctly.
#own _
• PCM ONLY
When you connect the DIGITAL OUT jack of the unit to
the linear PCM digital input of other audio equipment.
STREAM/PCM
When you connect to the digital input of an amplifier
to a built-in DTS, Dolby Digital, or MPEG multichannel
decoder.
DOLBY DIGITAL/PCM
When you connect to the digital input of a Dolby
Digital decoder, or an amplifier with a built-in Dolby
Digital decoder.
The following chart shows the relationship between
types of playback discs and output signals.
Playback discs
Output
STREAM/
PCM
DOLBY
DIGITAL/
PCM ONLY
PCM
DVD with 48 kHz, 48 kHz,16 bit
16 bit linear PCM linear PCM
DVD with 48 kHz, 48 kHz,
20/24 bit linear 20/24 bit *- *-
PCM linear PCM
DVD with 96 kHz, No output ,- ,-
linear PCM
DVD with DTS DTS bitstream No ouput *-
DVD with Dolby Dolby Digital ,- 48 kHz, 16 bit
Digital bitstream linear PCM
DVD with MPEG MPEG 48 kHz, 16 bit
multichannel bitstream linear PCM
Video CD/SVCD 44.1 kHz,
16 bit *- *-
linear PCM
Audio CD 48 kHz,16 bit
linear PCM
Audio CDwith DTS DTS bitstream *- *-
MP3 CD No output *- *-
NOTES
• The unit does not provide the DTS decoding function.
• When playing a DVD VIDEO or Audio CD disc with DTS,
use a DTS decoder to get correct signalsfrom your
speakers. Never use the unit's analog output jacks,
which output incorrect signals that may damage your
speakers.
• If you connect the analog outputs and digital outputs
simultaneously, be sure to select the sourceof the
amplifier correctly, or set the level control of the
amplifier connected to the analog outputs to minimum.