JVC XV-S200BK Instructions Manual page 19

In the following description, the buttons on the remote control unit are mainly used, however, you may use the
corresponding buttons on the front panel of the unit if available.
Turning on/off the unit
Press STANDBY/ON
(5/I
on the remote control unit or
press
(5/I
on the front panel.
QFEN
O
MODE PH_rC _ANCEL RETURN
Q Q O
Q Q O
QQO /
STANDBY/ON Oil
L I |iiiii,iiii,== ] O
\\
• You can turn on the unit by pressing the I_ button. In this
case, the unit starts playback if the disc is set in the disc tray.
° If no disc is set, "NO DISC" appears on the display window.
° You can turn on the unit by pressing the __ (OPEN/CLOSE)
button on the front panel.
NOTE
• Even if you the STANDBY/ON _11 or (_/Ibutton to turn offthe unit, the unit is not disconnected from the AC power source as long
as it is connected to the wall outlet. This state is called the standby mode. In this state, the unit consumes a very small amount of
power.
Inserting and removing discs
1 PressA_(0PEN/CLOSE) t o open the disc tray.
2 Placethe disc in the tray.
With the label side up
• To insert an 8-cm disc, place
it in the inner recess.
3
PressA_(0PEN/CLOSE) t o close the disc tray.
° If you press __ (OPEN/CLOSE) during playback, the unit stops playback and opens the tray.
NOTES
• The unit can playback DVD VIDEO, Audio CD, Video CD/SVCD and MP3 CD discs only. Do not load other disc types. For details
about playable disc types, see page 12.
° When loading a disc in the tray, be sure to position the disc inside the recess. Otherwise, the disc may be damaged when the
tray is closed, and the disc may not be removed from the unit.
17