JVC XV-S200BK Instructions Manual page 17

Getting started
You can enjoy high-qualiW audio by connecting the unit's audio output to your amplifier or receiver.
The unit
White
f
Audio cable
(not supplied)
Amplifier or receiver
IN
• Connect the unit's AUDIO OUT to any line-level inputs (such as AUX, DVD, CD, etc.) of an audio amplifier or receiver.
You can enhance the sound quality by connecting the unit's DIGITAL OUT jack (COAXIAL) to the digital input of a
receiver, CD Recorder, etc. by using an optional digital cable. The digital audio signal from a disc is directly transferred. If
you connect the unit to a Dolby Digital or DTS decoder or an amplifier with a built-in decoder by using an optional digital
cable, you can enjoy high-quali W surround sound.
When you make the digital connection, we also recommend to make the analog connection, because, depending on
discs, no signal may be output from the DIGITAL OUT.
The unit
DI,
White
I
Coaxial digital cable
(not supplied)
I
Audio cable
(not supplied)
Digital equipment
NOTES
• When you connect the unit's DIGITAL OUT to digital audio equipment, before using, make the "DIGITAL AUDIO OUTPUT"
setting in the "AUDIO" page of the preference display correctly according to the connected audio equipment. If the "DIGITAL
AUDIO OUTPUT" is not set correctly, loud noise may be generated from speakers, causing damage to your speakers. See
"DIGITAL AUDIO OUTPUT" on page 40.
• With the digital connection, the COMPRESSION settings in the AUDIO page of the preference display are invalid. Settings for
these items must be made from the decoder.
15