Table of Contents
Advertisement
en Hob-based hood control
Tip: For further information and details about the avail-
ability of Remote Diagnostics in your country, please
visit the service/support section of your local website:
www.home-connect.com.
23.8 Data protection
Please see the information on data protection.
The first time your appliance is registered on a home
network connected to the Internet, your appliance will
transmit the following types of data to the
Home Connect server (initial registration):
¡ Unique appliance identification (consisting of appli-
ance codes as well as the MAC address of the in-
stalled Wi-Fi communication module).
Hob-based hood control
24 Hob-based hood control
If the hob and the extractor hood are Home Connect-
compatible, connect the appliances in the Home Con-
nect app. To do this, connect the two appliances to
Home Connect and follow the instructions in the app.
Notes
¡ Using the controls on the extractor hood always
takes priority. It is not possible to use the hob-based
hood control during this time.
¡ You can only connect to the extractor hood via the
Home Connect app. Other connection routes are no
longer supported.
24.1 Resetting Home Connect settings
If you have problems connecting your appliance to the
WLAN home network (Wi-Fi) or if you want to log your
appliance onto a different WLAN home network (Wi-Fi) ,
you can reset the Home Connect settings.
Note: If you reset the Home Connect settings, the con-
nection to any extractor hood will also be terminated.
Touch
to open the basic settings.
1.
Select the "Hood control" setting.
2.
Touch "Disconnect".
3.
24.2 Controlling the extractor hood via the
hob
In the basic settings for your hob, you can adjust the
behaviour of your extractor hood depending on
whether the hob or individual cooking zones are
switched on or off.
24.3 Overview of the hood control settings
In the basic settings for your hob, you can adjust the behaviour of your extractor hood depending on whether the hob
or individual cooking zones are switched on or off.
The display shows the settings only when the appliance has been connected to the extractor hood.
24
¡ Security certificate of the Wi-Fi communication mod-
ule (to ensure a secure data connection).
¡ The current software and hardware version of your
appliance.
¡ Status of any previous resetting to factory settings.
This initial registration prepares the Home Connect
functions for use and is only required when you want to
use the Home Connect functions for the first time.
Note: Please note that the Home Connect functions
can only be utilised with the Home Connect app. In-
formation on data protection can be retrieved in the
Home Connect app.
You can select other settings using the controls on the
hob.
Setting the fan
In the status bar, touch
1.
Select a fan setting on the control panel.
2.
You can choose between the levels 1, 2 and 3.
To set an intensive setting, touch
Switching off the fan
In the status bar, touch
1.
Select fan setting 0.
2.
Switching on automatic mode
In the status bar, touch
1.
Touch auto in the settings area.
2.
a auto lights up red.
a The fan starts automatically when steam is pro-
duced.
Switching off automatic mode
In the status bar, touch
1.
Select fan setting 0.
2.
Setting the hood lighting
You can switch the hood lighting on and off using the
control panel of the hob.
To switch the lighting on, touch
▶
.
or
.
.
.
.
in the status bar.
Advertisement
Table of Contents
