Table of Contents
Advertisement
24.1 Setting up the Home Connect app
Install the Home Connect app on your mobile
1.
device.
Start the Home Connect app and set up access for
2.
Home Connect.
The Home Connect app guides you through the en-
tire login process.
24.2 Setting up Home Connect
Requirements
¡ The appliance is connected to the power supply and
is switched on.
¡ You have a mobile device with a current version of
the iOS or Android operating system, e.g. a smart-
phone.
¡ The Home Connect app has been installed on your
mobile device.
¡ The appliance is receiving signals from the WLAN
home network (Wi-Fi) at its installation location.
¡ The mobile device and the appliance are within
range of your home network's Wi-Fi signal.
Open the Home Connect app and scan the follow-
1.
ing QR code.
Follow the instructions in the Home Connect app.
2.
24.3 Overview of the Home Connect
settings
You can adjust the settings and network settings for
Home Connect by going to your hob's basic settings.
The hob shows the setting "Set using the assistant" if
the hob is not connected to the home network. All
other settings are only displayed if the hob is already
connected to the Wi-Fi.
Setting
Description and options
Set using the
The hob can be set up to automatic-
assistant
ally log into your home network, or
you can do this manually.
¡ Use the assistant to configure the
settings (automatic connection to
the home network).
¡ Use the assistant to configure the
settings: WPS not supported
(manually log into your home net-
work).
Connect to
You can connect the hob to one or
app
more Home Connect accounts.
Factory setting
1
Setting
Set using the
app
Wi-Fi
Disconnecting
from the net-
work
Appliance info
24.4 Wi-Fi symbol
The Wi-Fi indicator on the main screen changes ac-
cording to the status and quality of the connection and
the availability of the Home Connect server.
If you press and hold the symbol for at least two
seconds, the display shows a description of the sym-
bol.
24.5 Changing settings via the
Home Connect app
You can use the Home Connect app to change the set-
tings for the cooking zones and send them to the hob.
Requirements
¡ The hob is connected to the Wi-Fi and to the
¡ In order to set the hob via the Home Connect app,
1.
a If cooking settings are transmitted to a cooking
1
2.
3.
24.6 Software update
Your appliance's software can be updated using the
software update function, e.g. for the purposes of op-
timisation, troubleshooting or security updates.
To do this, you must be a registered Home Con-
nect user, have installed the app on your mobile device
and be connected to the Home Connect server.
Description and options
¡ Off: Only the hob's current status
is displayed in the app.
1
¡ On
tings from the app to the hob. The
cooking settings that are sent
must be confirmed on the hob.
You can switch off the hob's wireless
module to disconnect it from the Wi-
Fi.
¡ Deactivated: The wireless module
is switched off.
¡ Activated
nected.
You can delete the saved connec-
tions to the Wi-Fi.
The network connection is also de-
leted if you restore the factory set-
tings on your hob.
You can display information about
Home Connect and the network.
1
Factory setting
Home Connect app.
the basic setting "Setting via the app" must be
switched on. The basic setting is switched on on de-
livery. If the option for the transmission of settings
has been deactivated, only the hob's operating
statuses will be displayed in the Home Connect app.
Select the setting in the Home Connect app and
send it to the hob.
Follow the instructions in the Home Connect app.
Settings that you send from the Home Connect app
to the hob must be confirmed on the hob.
zone, the display shows a message.
To confirm a setting, touch "Apply".
To discard the setting, touch "Discard".
Home Connect en
: You can send cooking set-
1
: Wireless module con-
23
Advertisement
Table of Contents
