Bosch PXY601JW1E/48 Information For Use page 15

15.1 Transfer settings
Requirement: Move the cookware to a cooking zone
which is not switched on, which you have not yet pre-
set and on which no other cookware has been previ-
ously placed.
Assist
16 Assist
The cooking assistant is guaranteed to make cooking
simple and it promises outstanding cooking results.
If you have selected the required temperature, the
sensors continuously measure the temperature of the
cookware and keep it constant during the cooking pro-
cess.
Advantages
¡ Once the selected temperature is reached, it auto-
matically keeps it constant, saving energy.
¡ The oil will not overheat and the food will not boil
over.
16.1 PerfectFry Sensor
Suitable for cooking or reducing sauces, pancakes or
frying eggs with butter, for frying vegetables or steaks
up to the required level of boiling, and for keeping the
temperature under control.
This function is available on all cooking zones marked
with this symbol ⁠ .
Temperature levels
Temperature levels for preparing meals.
Level Temper- Functions
ature
1 120 ºC Boiling and reducing sauces, fry ve-
getables
2 140 ºC Searing in olive oil or butter
3 160 ºC Frying fish and coarse foods
4 180 ºC Deep-fat frying breaded, frozen and
grilled food
5 215 ºC High-temperature grill and griddle
plate
Recommended cookware
Special cookware has been developed for this function,
which delivers the best results.
The recommended cookware is available from cus-
tomer service, specialist retailers or our online shop
www.bosch-home.com.
Move the cookware.
1.
The cookware is detected. After a few seconds, the
option to confirm the default settings for the new
cooking zone appears on the display.
Confirm the settings.
2.
a The settings are transferred to the new cooking
zone.
Note: You can also use other cookware. Depending on
the composition of the cookware, the achieved temper-
ature may differ from the selected temperature level.
Switching on the PerfectFry Sensor
Place empty cookware on the cooking zone.
1.
Select a cooking zone.
2.
Touch and select
3.
Select the required temperature level and touch
4.
to return to the main screen.
a The function is switched on. The temperature level
and light up.
a The temperature display lights up increasingly red
until the required temperature level has been
reached. A signal then sounds.
Add the frying fat and then the food to the frying
5.
pan.
Switching off PerfectFry Sensor
Select the cooking zone.
1.
Set to 0.
2.
a The function is switched off.
To exit the PerfectFry Sensor function, touch
3.
and select a different cooking mode.
Recommendations for cooking with PerfectFry
Sensor
The following table shows the ideal temperature levels
for a selection of dishes. The temperature and the
cooking time depend on the amount, condition
and quality of the food.
Meat
Escalope
Escalope, breaded
Fillet
Chops
Cordon bleu, Wiener Schnitzel
Steak, rare, 3 cm thick
Steak, medium, 3 cm thick
Steak, well-done, 3 cm thick
T-bone steak, rare, 4.5 cm thick
Assist en
⁠ PerfectFry Sensor.
4 6-10
4 6-10
4 6-10
3 10-15
4 10-15
5 6-8
5 8-12
4 8-12
5 10-15
15