Table of Contents
Advertisement
D.5
Keeping the manual
The manual must be carefully kept for the entire life of the
appliance, until scrapping. The manual must stay with the
appliance in case of transfer, sale, hire, granting of use or leasing.
D.6
Recipients of the manual
This manual is intended for:
• the carrier and handling personnel;
• installation and commissioning personnel;
• the employer of appliance users and the workplace manager;
• operators for normal appliance use;
• specialised personnel - Customer Care service (see service
manual).
D.7
Definitions
Listed below are the definitions of the main terms used in the
manual. It is advisable to read them carefully before use.
Operator
appliance installation, adjustment, use,
maintenance, cleaning, repair and trans-
port personnel.
Manufacturer
Electrolux Professional SpA or any other
service centre authorised by Electrolux
Professional SpA.
Operator for
an operator who has been informed and
normal appli-
trained regarding the tasks and hazards
ance use
involved in normal appliance use.
Customer Care
an operator instructed/trained by the Man-
service or spe-
ufacturer
cialised
professional and specific training, experi-
personnel
ence and knowledge of the accident-
prevention regulations, is able to appraise
the operations to be carried out on the
appliance and recognise and prevent any
risks. His professionalism covers the
mechanical, electrotechnical and elec-
tronics fields etc.
Danger
source of possible injury or harm to health.
Hazardous
any situation where an operator is exposed
situation
to one or more hazards.
Risk
a combination of probabilities and risks of
injury or harm to health in a hazardous
situation.
Protection
safety measures consisting of the use of
devices
specific technical means (guards and
safety devices) for protecting operators
against risks.
Guard
an element of a appliance used in a specific
way to provide protection by means of a
physical barrier.
Safety device
a device (other than a guard) that elimi-
nates or reduces the risk; it can be used
alone or in combination with a guard.
Customer
the person who purchased the appliance
and/or who manages and uses it (e. g.
company, entrepreneur, firm).
Electrocution
an accidental discharge of electric current
on a human body.
E
TECHNICAL DATA
CAUTION
and
who,
based
on
D.8
Responsibility
The Manufacturer declines any liability for damage and
malfunctioning caused by:
• non-compliance with the instructions contained in this
manual;
• repairs not carried out in a workmanlike fashion, and replace-
ments with parts different from those specified in the spare
parts catalogue (the fitting and use of non-original spare parts
and accessories can negatively affect appliance operation
and invalidates the original manufacturer warranty);
• operations carried out by non-specialised personnel;
• unauthorized modifications or operations;
• missing, lack or inadequate maintenance;
• improper appliance use;
• unforeseeable extraordinary events;
• use of the appliance by uninformed and / or untrained
personnel;
• non-application of the current provisions in the country of use,
concerning safety, hygiene and health in the workplace.
The Manufacturer declines any liability for damage caused by
arbitrary modifications and conversions carried out by the user or
the Customer.
The employer, workplace manager or service technician are
responsible for identifying and choosing adequate and suitable
personal protection equipment to be worn by operators, in
compliance with regulations in force in the country of use.
The Manufacturer declines any liability for inaccuracies con-
tained in the manual, if due to printing or translation errors.
his
Any supplements to the installation, use and maintenance
manual the Customer receives from the Manufacturer will form
an integral part of the manual and therefore must be kept
together with it.
D.9
Customer packaging checks
• The forwarder is responsible for the goods during transport
and delivery.
• Make a complaint to the forwarder in case of visible or hidden
damage.
• Specify any damage or shortages on the dispatch note.
• The driver must sign the dispatch note: the forwarder can
reject the claim if the dispatch note is not signed (the
forwarder can provide the necessary form).
• For hidden damage or shortages becoming apparent only
after unpacking, request the forwarder for inspection of the
goods within and no later than 15 days after delivery.
After packaging checks
1. Remove the packaging.
Take care when unpacking and handling of the appliance to
not cause any shocks on itself.
2. Keep all the documentation contained in the packaging.
D.10 Storage
The appliance and/or its parts must be stored and protected from
damp, in a non-aggressive place, free of vibrations and with
room temperatures between 5℃ and 50℃.
The place where the appliance is stored must:
• can take the appliance load,
• have a flat support surface to avoid deforming the appliance
or damage to the support feet.
17
Advertisement
Table of Contents
