3. Current state
1) Display the "Operation Button Guide ①" by pressing any one of operation buttons
(A–C).
2) Press the "MENU" button.
3) Select "CURRENT STATE" from MENU 1/2 using the "▼" or "▲" button and press the
"OK" button. The following "CURRENT STATE" OSD appears as below.
Current luminance
Current ambient Light
Current color
Current input source
Configuration number
Luminance setting
Gamma setting
Color setting
4. DICOM conformance test
1) Display the "Operation Button Guide ①" by pressing any one of operation buttons
(A–C).
2) Press the "MENU" button.
3) Select "DICOM CONFORMANCE TEST" from MENU 1/2 using the "▼" or "▲" button
and press the "OK" button. The following "DICOM CONFORMANCE TEST" OSD
appears as below.
Test result
Maximum deviation
Luminance status
Continuous lighting time
of the backlight
CURRENT STATE
C U R R E N T
S T A T E
L U M I N A N C E
:
A M B
L I G H T
:
C O L O R
:
I N P U T
:
C A L I B R A T I O N
S E T T I N G
C O N F I G
:
L U M I N A N C E
:
G A M M A
:
C O L O R
:
DICOM CONFORMANCE TEST
D I C O M
C O N F O R M A N C E
R E S U L T
M A X
D E V I A T I O N
L U M I N A N C E
E L A P S E D
T I M E
S T A R T
T E S T I N G
Y e s
> N o
- 11 -
4 0 9
1 0 0 . 0 lx
7 5 0 0 K
( x = 0 . 3 0 0
y = 0 . 3 1 5 )
D V I
1
4 1 0
/
0 . 6
D I C O M
G S D F
7 5 0 0 K
( x = 0 . 2 9 9
y = 0 . 3 1 5 )
T E S T
:
P a s s e d
:
4 . 5
%
:
S t a b l e
:
1 2 3 m i n
5 M P
5 M P