Automatic Electrode Cleaning - Panasonic AlCare TK-AS500 Operating Instructions Manual

Alkaline ionizer
Table of Contents

Advertisement

Automatic Electrode Cleaning

When the
indicator
is lit
Start timing of automatic electrode cleaning
After every use of
alkaline ion water
Automatic Electrode Cleaning
(Approx. 8 seconds)
"-----" is displayed.
Remains lit
(until completion
of cleaning)
When water is stopped during preparation (while
z
the water quality indicator is blinking), the automatic
electrode cleaning is not performed.
Do not run water until the cleaning is completed.
z
Even if
z
from the drain hose.
Water may drip from the main spout. It is not a
z
malfunction. (This is water remaining in the outlet pipe.)
The automatic electrode cleaning is not performed for
z
10 minutes after alkaline ion water 1 to 3 is used.
Automatic electrode cleaning is performed to remove
calcium deposited on the electrode plate.
Wait for a while.
Do not remove the power plug.
z
Water coming out of the main spout and drain hose during automatic electrode
z
cleaning cannot be used. (The water has been used during cleaning.)
The electrode plate is located in the electrolyzer inside the main unit.
z
Removing the calcium prevents deterioration of electrolysis capability.
After every
use of acidic
water
When the faucet
is turned off
Water comes
out from the
drain hose
turns off, water may come out
When the Alkaline Ionizer has not been
used for 24 hours
When water is flowed after
selecting alkaline ion water or
purified water...
Automatic Electrode Cleaning
(Approx. 10 seconds)
"-----" is displayed.
Water quality
signal
Cleaning : Blinks in pink
Preparation : Blinks in blue
or green
Cleaning complete : Lit in blue or
green
The water quality signal blinks in pink during
automatic electrode cleaning. After the cleaning
is completed, the water quality signal changes to
blue or green.
When a buzzer beeps, you can use the product.
Do not stop water flow until the cleaning is completed.
z
Remains lit
(until completion
of cleaning)
Buzzer beeps
from the start
(about 3
seconds)
From main
spout and
drain hose
EN31

Advertisement

Table of Contents
loading

Table of Contents