Ef5: Unbalanced Load, Spin Phases Skipped; Ef6: Reset Appliance; Eh1: Mains Frequency Incorrect - Electrolux EWM09312 Service Manual

Hide thumbs Also See for EWM09312:
Table of Contents

Advertisement

EF5
Checks to perform:
This is an unbalanced load warning. The appliance detected an extremely unbalanced load during the
spin phases. Advise the customer to load more washing into the drum and not just individual garments.
EF6
Checks to perform:
No action to be performed, if continues, replace the main circuit board
EH1
Checks to perform:
The appliance remains in alarm status until the mains frequency returns to the correct
!
values or the appliance is switched off (programme selector set to "0"). Only the family of
the alarm is displayed and the diagnostics mode cannot be accessed. The complete
Is the supply line disturbed or the mains
frequency out of range?
YES
Have the electrical system of the home
checked / repaired by the proper Body.
2012 SOE/DT-mdm FCPD-dp
Guide to diagnostics of EWM09312 electronic controls

EF5: Unbalanced load, spin phases skipped.

EF6: Reset appliance.

EH1: Mains frequency incorrect

Power supply frequency out of configured range
alarm can only be read when the situation has normalised.
!
Check that all the connectors are correctly inserted
!
Check that all the connectors are correctly inserted
!
Check that all the connectors are correctly inserted
Important!
Replace the main circuit board and repeat the
diagnostic cycle to check for any further
NO
!
62/69
alarms.
If there are burns on the circuit board,
see page 67
599 75 18-74 Rev.00
EF5
EF6
EH1
!

Advertisement

Table of Contents
loading

Table of Contents