GE MDS TransNEXT NET9L Technical Manual page 5

Approved Antennas
This product has been approved for use with the antennas listed in Table 1-1, below:
Table 1-1. Approved Antennas for TransNEXT
Professional installation is required. The installation site must conform to 15.247/RSS-247 Conducted
and Radiated Power limits. Proper feedline selection and/or radio power setpoints must be set
accordingly for use with each antenna type as detailed in Table 1-2.
Table 1-2. Feedline losses and radio power setpoints for ERP and Conducted Power compliance for
TransNEXT installations.
MDS 05-7280A01, Rev. A MDS TransNEXT Technical Manual 5