Pushbutton Control Using The Dtmf - Kenwood TM-732A Instruction Manual

10. Pushbutton Control Using the DTMF Microphone
MC-45DM
key
This transceiver can be controlled by the DTMF
tones generated by the DIMF microphone.
(The MC-45DM microphone is optional in some
market areas.)
@ Function selection
Hold down the F key, then press the C. SEL key.
The S/RF indicator flashes.
GOED -. 0 ar
@ Operation
1. Connect the DTMF microphone.
2. The functions that can be controlled by the
microphone and the associated key are listed in
the accompanying chart.
To cancel DTMF microphone control press and
hold the F key and then press the C.SEL key.
54
Key operation
MIC1 key (F key) operation
+ key
Same as SHIFT on the transceiver
Same as TONE on the transceiver
Bell sound selection
Tone frequency selection
Same as REV on the transceiver
Same as MHz on the transceiver
Shift selection
—————
Monitor key
Indicate frequency by tone.
VOL UP/DWN ON/OFF
Microphone key lock setting
Microphone key lock cancel
Change between UxU and VxV.
SQL UP/DWN ON/OFF
Same as LOW on the transceiver
Enter key
Change the illumination
brightness.
Same as C.SEL on the transceiver
Leama as MUTE on the transceiver
Same as F on the transceiver
DOWN key
Speaker change
F key operation off |
DOWN ke
Y Sea |
UP key
UP key