Epson SureColor SC-F6300 Series User Manual page 68

SC-F6300 Series User's Guide
F
Wipe off ink that has adhered to the guide
section.
G
Put the cup supplied with the cap cleaning kit on
the tray, and pour approximately 5 ml of cap
cleaning liquid into the cup.
H
Draw some cap cleaning liquid with the dropper.
Maintenance
I
Drip some cap cleaning liquid (2 to 3 drops) from
the dropper until the inside of the anti-drying
caps (all the caps except the left edge) are full.
c
Important:
Do not drip cap cleaning liquid into the insides
of the suction cap. Doing so may cause the
printer to malfunction.
Do not try to wipe up drips even if you have
dripped some liquid by mistake. If you touch
the inside of the suction cap, it may no longer
be possible to perform capping correctly.
Add more if 2 to 3 drops is not enough.
Do not allow it to overflow from the insides of the
anti-drying caps.
68