Installation notes
Connection and conversion instructions
Connection and conversion work must be performed by the Miele Customer Service De-
partment or by an authorised dealer's trained personnel.
The settings for gas-heated flatwork ironers are made at the factory in line with the gas
specifications at the rear of the appliance.
Gas hose
The gas appliance must be connected using a corrugated metal hose assembly made from
stainless steel in accordance with DIN 3384. Alternatively, a hose that complies with
DIN EN 16617 may be used with connections in accordance with DIN 3384. When select-
ing the hose, the required flow rate must be taken into account. The relevant national regu-
lations must also be observed.
Main connection
Natural gas
Connection pressure
measuring stub
14
Liquid gas
Hose
Pressure regulator
cap screw
V1
Threaded union*
Reduction sleeve*
* Supplied with the kit for converting natural gas to liquid gas.
Gas regulating valve
Pressure regulator
cap screw
Jet pressure
measuring stub
V2