Other Displayed Codes
Display
•
These are not Error Codes and do not indicate any errors that would disable the unit.
LG Electronics Training Center, LGEAI, U.S.A.
Error Codes - IE
NOTE: Always check all the Inlet Valves before replacing a Main Board, as a
shorted Inlet Valve will damage the Main Board.
LG Electronics Training Center, LGEAI, U.S.A.
Meaning
Tub Clean is needed
Child Lock is activated
Power Failure has occurred.
118
• The IE Error Code indicates a "Water Inlet Error"
• Condition:
1. Minimum water level (246 measured by the
Pressure Sensor) was not reached within 8
minutes after water inlet valve was energized
2. Water level does not reach the full level
(determined by Load Sense/Cycle setting) within
25 minutes.
• Possible Causes:
Water connection turned off
Sediment/Debris in inlet hoses or Clogged filter screen
Bad water inlet valve, or associated wiring
Bad Pressure Sensor, or associated wiring
Crack/hole in Tub
Hole or clog in tube to Pressure Sensor
Bad Main Board
119