Advertisement
Steam Generator
SG Thermistor
GY(VDC) to BK(Grd)
0.5 – 4.5 VDC
70
- 3.6 VDC / 60KΩ
212
- 0.9 VDC / 3.3KΩ
SG Sensor
L – Low Water (OR)
S – High Water (BN)
Ground (BK)
< 2.0 VDC Water Sensed
> 3.0 VDC No Water Sensed
Water Pump
BL(VDC) to YL(Grd)
9 VDC
LG Electronics Training Center, LGEAI, U.S.A.
QC Test Mode
The dryer must be in Standby mode (plugged in and turned off)
•
Press and Hold the MORE TIME and LESS TIME buttons
•
Press the POWER button
•
Release all buttons.
•
Number of times the
Start/Pause button is pressed
None
1 time
2 times
3 times
4 times
5 times
6 times
CAUTION: Do not manually operate the Heaters by having the door open and door
switch held closed. This can trip the Thermostat.
LG Electronics Training Center, LGEAI, U.S.A.
85
Check point
Turns on display
Tumble
Tumble & Heater 1
Tumble & Both Heaters
Tumble, Water Pump, SG Heater
All Off
Exit
86
SG Heater
13Ω
1100W @ 120VAC
Display status
Software Version
Moisture Sensor Reading
No Moisture – 255
High Moisture – Lower Reading
Temperature in C
Temperature in C
Water Pump AD Valve 11 - 255
Advertisement
