Cuisinart DBM-T10 Series - Touchscreen Burr Grinder Manual

Cuisinart DBM-T10 Series - Touchscreen Burr Grinder Manual

Also See for DBM-T10 Series:

Advertisement

Cuisinart DBM-T10 Series - Touchscreen Burr Grinder Manual

IMPORTANT SAFEGUARDS

For your safety and continued enjoyment of this product, always read the instruction book carefully before using.

When using electrical appliances, basic safety precautions should always be followed, including the following:

  1. Read all instructions.
  2. Unplug from the outlet when not in use, before assembling or disassembling parts and before cleaning. To unplug, grasp the plug and pull from the outlet. Never pull from the power cord.
  3. shock hazard To protect against risk of electric shock, do not immerse cord, plug or grinder in water or other liquids.
  4. This appliance is not intended for use by persons (including children) with reduced physical, sensory, or mental capabilities, or lack of experience and knowledge, unless they are closely supervised and instructed concerning use of the appliance by a person responsible for their safety. Close supervision is necessary when any appliance is used by or near children. Children should be supervised to ensure that they do not play with the appliance.
  5. Avoid contact with moving parts.
  6. Do not operate any appliance with a damaged cord or plug or after the appliance malfunctions, or is dropped or damaged in any manner. Contact the manufacturer at their customer service telephone number for information on examination, repair, or adjustment.
  7. burn hazardshock hazard
    The use of attachments not recommended or sold by Cuisinart may cause fire, electric shock, or risk of injury.
  8. Do not use outdoors.
  9. Do not let cord hang over edge of table or counter, or touch hot surfaces.
  10. Before using, check hopper for presence of foreign objects.
  11. Use this appliance to grind roasted coffee beans only. Grinding other substances, such as nuts, spices or unroasted beans, may dull the blade and cause poor grinding or injury.
  12. Do not use appliance for other than it's intended use.
  13. Do not place this appliance on or near a hot gas or elec-tric burner, or in a heated oven.
  14. burn hazard Do not operate your appliance in an appliance garage or under a wall cabinet. When storing in an appliance garage, always unplug the unit from the electrical outlet. Not doing so could create a risk of fire, especially if the appliance touches the walls of the garage or the door touches the unit as it closes.

SAVE THESE INSTRUCTIONS

FOR HOUSEHOLD USE ONLY

NOTICE
shock hazard This appliance has a polarized plug (one blade is wider than the other). To reduce the risk of electric shock, this plug will fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. Do not modify the plug in any way.

INTRODUCTION

The next generation of coffee grinders has arrived to deliver the new standard in home-ground coffee! The burr grinds the beans with precise uniformity while maintaining the full flavor of the coffee bean. Whether you're using a French Press, Auto Drip or Espresso machine, you'll always start with the best, most precise ingredients. This grinder is fully automated – just choose your grind setting and number of cups, touch Start, and the LCD with countdown timer lets you know how soon you'll have your perfectly ground coffee!

OVERVIEW

OVERVIEW

  1. Hopper Lid
  2. Bean Hopper
    1. with Burr Grinder Attached (not shown)
  1. Grind Selector
  2. Control Panel with LCD Display
    1. Number of Cups
    2. Countdown Timer
    3. Cup Selector
    4. Manual Icon
    5. Start Icon
    6. Power Icon
  1. Grind Chamber with Lid
  2. Cord Storage (not shown)
  3. Scoop Brush

OPERATING INSTRUCTIONS

  1. Remove bean hopper lid.
  2. Fill bean hopper, making sure that the lid closes securely. Maximum bean capacity is 8 oz. Be sure you have enough beans to grind your desired amount of coffee.
  3. Select grind setting – turn the hopper to the desired setting. The higher the number, the coarser the grind. Use 1–6 for Espresso, 7–12 for Auto Drip, 13–18 for French Press.
  4. Plug cord into outlet. Touch the power icon to illuminate the touchscreen.
  5. Select cup setting – press the cup selector icon repeatedly until your desired number of cups is displayed on the LCD, from 1 to 14 cups. Press and hold the icon to scroll through the numbers quickly.
  6. Touch the Start icon to begin grinding. A safety interlock system prevents the unit from operating unless the hopper and grind chamber are properly in place.
  7. Grinding will automatically stop upon completion.
    NOTE: To cancel operation during use, touch the Start or Power icon. The grinder will stop and the display will return to the selection screen.
  8. Pull the grind chamber toward you to remove from unit.
    NOTE: If the grind chamber is overfilled, the chute can get clogged and the unit will not work. To unclog, use the scoop brush to clear out the chute of excess grounds. Should the grinder stop at any point, the motor has likely overheated. Wait for your grinder to cool off (up to 30 minutes), then resume use.

MANUAL GRIND

If you prefer, after selecting your grind setting, you have the option of manually controlling how much coffee the unit will grind. To do so, follow steps 1–4 on previous page. Then press and hold the manual icon until the desired amount of coffee has been ground. The LCD will display the number of cups dispensed.
NOTE: To avoid overflow when using the manual feature, the grinder will automatically stop grinding when the maximum capacity has been reached.

CLEANING/MAINTENANCE INSTRUCTIONS

  1. Be sure plug has been removed from outlet.
  2. Beans can be removed from the hopper by lifting off the lid and pouring excess beans out. Hold down the Manual icon to clean out any remaining beans.
  3. The bean hopper lid, grind chamber, and grind chamber lid can be washed by hand with hot, soapy water or placed in the top shelf of a dishwasher. Dry thoroughly.
  4. To remove the bean hopper for easy cleaning, simply remove beans, then turn the hopper counterclockwise to unscrew and lift out.
  5. Use the brush to remove grinds or wash by hand. Replace the burr grinder onto the unit and rotate until the piece is fully inserted.
    NOTE: The hopper will not attach to the unit if the grinder has not been fully inserted.
  6. Wipe body of grinder with a damp cloth.


Never immerse unit in water.

Maintenance
Any other servicing or maintenance should be performed by an authorized service representative.

Documents / Resources

Download manual

Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.

Download Cuisinart DBM-T10 Series - Touchscreen Burr Grinder Manual

Advertisement

Need Assistance?

Do you have a question about the DBM-T10 Series that isn't answered in the manual? Leave your question here.

Error while submitting your question. Please, reload page and try again.

Thank you! Your question has been received!

Table of Contents