Amn-P15-Sip Ip Amplifier Module; Considerations; Mounting - Bosch LHN-UC15L-SIP User Manual

14 en | Installation
2.2

AMN-P15-SIP IP Amplifier Module

2.2.1

Considerations

Before installing the IP Amplifier module, consider the following:
Required tools
–
–
–
2.2.2

Mounting

The IP Amplifier module has two installation options:
Fixed to surface
The chassis has 4 pierce-through holes that
you can drill for surface mounting. Each hole
has a maximum diameter of 5 mm.
Surface mount (A)
To mount the IP Amplifier module to a solid surface:
1
2023.02 | V01 | F.01U.389.835
Slotted screwdriver (0.4 x 2.5 mm)
4x ≤5 mm Allen head screws
T20 Torx screwdriver (fasten torque: 2.0-2.5 Nm)
Remove the cover by pressing the
two latches on the top of the cover
(1).
The cover disengages from the IP
Amplifier module (2).
LHN‑UC15L‑SIP | LHN‑UC15W‑SIP | AMN‑P15‑SIP
Mounted on a DIN rail
The module comes with a DIN rail mounting
plate and 2 TX20 screws as part of the
components. To mount this into a DIN rail
(corresponds to TH 35-7.5 acc. to EN 60715)
you must first attach the mounting plate to
the IP Amplifier module.
1
User manual
2
Bosch Security Systems B.V.