Bosch ZEMO SU-E FS 12 Translation Of Original Operating Instructions page 78

Fitting the crank set
35 Grease the toothing on the crankshafts.
Grease belt sprocket or chain wheel. Place belt
sprocket or chain wheel on the crankshaft.
36 Position crank on top. Use the BOSCH tool and
a ratchet to fasten the crank to the left.
37 Fasten the crank screw with the specified
torque (Section 3.5.9.20 and 3.5.9.21).
38 Use a hex bit to fasten the retaining screws on
the left and right.
Figure 82: Fastening the belt sprocket (example)
Fitting the belt
39 Pull belt or chain over the belt sprocket or the
chain wheel.
Figure 83: Fitting the belt
MY22Z01 - 12_1.0_25.07.2022
40 Push the rear wheel backwards to tension the
belt or chain.
1
Figure 84: Pushing the rear wheel backwards
41 Check and adjust belt or chain tension (see
Section
42 Fit the pedal (see Section 5.3.6).
43 Remove belt or chain guard. Fasten retaining
screw.
Figure 85: Position of mount screw
44 Insert battery (see Section 6.16).
7.5.9 or 7.5.4).
1
Assembly
77