Grip Distance On A Magura Disc Brake Lever - Bosch ZEMO SU-E FS 12 Translation Of Original Operating Instructions

6.5.8.4 Grip distance on a MAGURA disc brake lever

Only applies to pedelecs with this equipment
WARNING
!
Crash caused by incorrectly set grip distance
If brake cylinders are set incorrectly or installed
wrongly, the braking power may be lost at any
time. This may cause a crash with injuries.
 Ensure that the fully applied brake lever is at a
minimum distance of 20 mm from the
handlebars.
The brake lever position can be adjusted to the
rider's requirements. Such adjustment does not
Figure 129: Adjusting the grip distance on a MAGURA disc brake lever
MY22Z01 - 12_1.0_25.07.2022
affect the pressure point or the position of the
brake linings.
 Turn the setting screw/twist knob (5) anti-
clockwise towards minus (–).
 The brake lever moves closer to the handlebar
grip.
 Turn the setting screw/twist knob (5) clockwise
towards plus (+).
 The brake lever moves away from the
handlebar grip.
Operation
109