LG SV-iC5 Series Instruction Manual page 33

Changing parameter values in Function 1, 2 and I/O group
When changing the parameter value of F 27 from 2 to 5
1
2
3
4
5
6
7
8
9
10
♣
The above setting is also applied to change parameter values in function group 2 and I/O group.
Function
group 1
-. In F0, press the Prog/Ent ( ) key once.
-. Check the present code number.
-. Increase the value to 7 by pressing the Up ( ) key.
-. When 7 is set, press the Left ( ) key once.
-. 0 in 07 is active.
-. Increase the value to 2 by pressing the Up ( ) key.
-. 27 is displayed
-. Press the Prog/Ent ( ) key once.
-. The parameter number F27 is displayed.
-. Press the Prog/Ent ( ) key once to check the set value.
-. The set value is 0.
-. Increase the value to 1 by pressing the Up ( ) key.
-. Press the Prog/Ent ( ) key once.
-. F27 is displayed after 5 stops blinking. Changing parameter value has been complete.
-. Press the either Left ( ) or Right ( ) key once to go to the first code.
-. Return to F0.
5-9
5. Programming keypad
SV-iC5