LG SV-iC5 Series Instruction Manual page 28

5. Programming keypad
How to move to other groups at the 1
1
2
3
4
5
♣
If the left arrow key ( ) is used, the above will be executed in the reverse order.
How to move to other groups from any codes other than the 1
Drive group
When you would like to move from the F 15 to function group 2
1
2
3
st
-. The 1 code in Drive group "0.0" will be displayed when AC input power is applied.
-. Press the right arrow ( ) key once to go to Function group 1.
st
-. The 1 code in Function group 1 "F 0" will be displayed.
-. Press the right arrow ( ) key once to go to Function group 2.
st
-. The 1 code in Function group 2 "H 0" will be displayed.
-. Press the right arrow ( ) key once to go to I/O group.
st
-. The 1 code in I/O group "I 0" will be displayed.
-. Press the right arrow ( ) key once again to return to Drive group.
st
-. Return to the 1 code in Drive group "0.0".
Function
group 1
-. In F 15, press the Left ( ) or Right arrow ( ) key. Pressing the key goes to the first code of
the group.
st
-. The 1 code in function group 1 "F 0" is displayed.
-. Press the right arrow ( ) key.
st
-. The 1 code in function group 2 "H 0" will be displayed.
st
code of each group.
Function
group 2
5-4
st
code
Pressing left or
right arrow key in
any code will return
to first code of
each group.
SV-iC5