LG STB-3000 Setup Manual page 61

Media Share Setup
Media Share allows you to enable Smart Share
and SoftAP options on this STB.
• The LG Smart Share feature allows guests to use the STB/display
panel to access and view data shared either by wired DLNA Certified
devices connected to the same LAN as the STB or by wireless LG
devices using LG's Smart Share application with Wi-Fi Direct
• Screen Share enables screen sharing with a Miracast
Display (WiDi) capable device (e.g., a laptop with Intel
• DMR enables the STB to act as a Digital Media Renderer (DMR)
device to receive content from DLNA Certified devices on the same
network.
• SoftAP enables the STB to function as a 2.4 GHz wireless access
point for up to five devices.
Note: See also Reference section, "Using Media Share Features," for
additional information.
1. With the Network Menu on display, use the arrow keys on the
Installer Remote to select Media Share. Then, press OK.
2. In the Media Share screen, the Smart Share, Screen Share, DMR,
and/or SoftAP features may be toggled from DISABLE to ENABLE
and vice versa as follows: Use the Up/Down arrow keys on the
Installer Remote to select/highlight the desired feature, and then
press OK.
If you intend to enable SoftAP, make sure to complete the SoftAP
access configuration as follows:
• To enable use of a randomly generated security key for SoftAP
access, set the Use Default field to "ENABLE" (the Security Key
field will subsequently be grayed out and the random security key
will be displayed).
• To specify your own security key for SoftAP access, set the Use
Default field to "DISABLE." Then, select the Security Key field
and press OK. In the data entry field, you can use the number
keys on the Installer Remote to direct enter a numeric security key,
or you can use the arrow keys to select the appropriate alphanu-
meric characters—at least eight, but no more than 64—from the
pop-up virtual keyboard displayed at the bottom of the screen.
Note that the security key may not contain any special characters
(:, /, \, @, etc.). When you are done, select Enter from the virtual
keyboard, and then press OK on the Installer Remote.
Note for SoftAP: A wired network connection MUST be established
in order for guests to use the SoftAP feature.
206-4272
®
, Screen Share, DMR,
®
®
.
®
or Wireless
®
hardware).
IP Environment Setup (Cont.)
MEDIA SHARE
Pro:Centric
Network
Smart Share
Screen Share
Pre-loaded Apps DMR
TV Name
401KKTF1J505
SoftAP
Use Default
Security Key
00000000
ENABLE
DISABLE
DISABLE
^
DISABLE
DISABLE
^
(Continued on next page)
61