LG STB-3000 Setup Manual page 21

(Continued from previous page)
If the process is successful, no further user interaction is required, though, in some instances, where
the option (for example "NEXT") is available, you may manually move forward to subsequent steps
within the wizard to speed up the process.
PROCESSING THE PRO:CENTRIC CONFIGURATION
Downloading the Pro:Centric application files takes a few minutes.
Application files
Maintenance Files
Warning - Do not remove AC power or the signal cables during these steps.
Note: If, after completing the search, the STB is unable to find the Pro:Centric data channel (while
the Searching for Pro:Centric Server screen is on display), the wizard will stop and show a
Diagnostics screen that enables you to manually return to the previous screen (to reinitiate the
configuration) or exit the wizard.
When the Pro:Centric Configuration is complete, an EZ-Manager Configuration Complete screen is
displayed (see example below), and after 10 seconds, the wizard exits, and the STB turns OFF.
EZ-MANAGER CONFIGURATION COMPLETE
Pro:Centric Application
Pro:Centric Application
Maintenance Files
Maintenance Files
Note: With the EZ-Manager Configuration Complete screen on display, you can also manually turn
off or reboot the STB. If desired, select TURN OFF or REBOOT, respectively, and then press OK
on the Installer Remote.
206-4272
Please wait...
Retrieving files from data channel 70
In progress...
Synchronizing...
STB will turn off in 10 second(s)
Installed Components
Installed Components
GEM application downloaded
GEM application downloaded
STB-3000_Config.tlx
LY970H_Config.tlx
REBOOT REBOOT TURN OFF
TURN OFF
EZ-Manager Wizard (Cont.)
2%
03
04
21