G5 Display Interface X71 - Bosch Rexroth IndraControl VSB 40.1 Project Planning Manual

46/83 Bosch Rexroth AG
PC Box
7.2.11

G5 Display Interface X71

X71 – G5 display interface
PS/2 Mini DIN female connector, 6-pin
Interrupt (IRQ):
BIOS presetting:
Fig.7-15: XMouse - PS/2 mouse interface
XPS2MS
Shield
Fig.7-16: Mouse interface XMS
If a PS/2 mouse is not recognized by the system, the mouse must be activated
in the BIOS by switching from Disabled to Autodetect. The operating system
will not recognize the plugging-in of an external mouse after completed startup,
because the mouse is initialized during the booting process only.
NOTICE
The connected mouse must be PS/2-compatible. Generally, the BIOS reserves
IRQ 12 for the PS/2 mouse. If there are address conflicts, e. g., if IRQ 12 is
already used by different PC extension cards, the IRQ of this extension card is
to be changed to another, still unassigned IRQ.
NOTICE
If a VDP display is connected to a VSB 40.1, the mouse can only be connected
to this one. The mouse interface XKMS at the VSB 40.1 has to remain free.
The G5 display interface is assigned to the 25-pin D-Sub female connector X71.
Connect a VDP 16 or VDP 40 display to this female connector via a ready-made
cable available as accessory (see
16 and VDP 40 (G4/G5 Display Interface)" on page
On delivery, the settings of the VSB 40.1 devices allow to trigger a
connected monitor as well as a connected VDP display.
The selection can be changed, if required, see
lecting the Graphics Driver" on page
DOK-SUPPL*-VSB*40.1***-PR03-EN-P
Rexroth IndraControl VSB 40.1 Control Cabinet PC
12
PS/2 mouse support:
Mouse: Auto detect
max. 1.5 m
1
Mouse Data
2
Mouse
3
GND
4
Power, +5VDC
5
Mouse Clock
6
Shield over metallic housing
of the plug connection
Malfunction or no function due to a mouse in‐
compatible with the PS/2 standard.
Entries with a mouse are possible if a keyboard
is connected to the VSB 40.1 if a VDP is con‐
nected.
chapter 11.2.2 "Connecting Cables to VDP
77).
35.
EnabledPS/2
chapter 6.2.3 "Se‐