Replacement Procedure - Panasonic WJ-HDE300 Conversion Manual

Digital disk recorder extension unit

Hide thumbs Also See for WJ-HDE300:

WJ-HDE300 S-ATA conversion guide

3. Replacement Procedure

Important +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++

• Before touching the HDD, eliminate static electricity accumulating in your body.

• Ensure that the HDD is protected against static charge by placing disks on a antistatic mat or a conductive bag during the conversion work.

+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++

(1) Remove two screws fixing the front panel.

(2) Slide the front panel to the left.

(3) Pull the both sides of the front panel toward you.

(4) Disconnect the connector of the cable coming out of the front panel.

Panasonic System Solutions

Front Panel

(3)

(2)

Maintenance guide

(3)

HDE300_SATAConversionGuide_B