Ps Doorphone Ringing Assignment - Day / Night - Panasonic KX-TD816 Programming Manual

Digital super hybrid system
Hide thumbs Also See for KX-TD816:
Table of Contents

Advertisement

[663-664] P S Doorphone Ringing Assignment – Day / Night
Description
These programmes assign which PSs will ring when a doorphone call is received during the
day and night modes. Programmed PSs are also allowed to open the door.
Selection
• PS registration number:
KX-TD816 – 01 through 16
KX-TD1232 – 01 through 64
• Doorphone number:
KX-TD816 – 1 or 2, Disable, two entries (max.)
KX-TD1232 – 1 through 4, Disable, four entries (max.)
Default
All PSs – Disable (No doorphones) (Day / Night)
Programming
1.
Enter a programme address (663 for day or 664 for night).
Display example: PS DPH in Day
2.
Press NEXT.
Display: PS NO?
3.
Enter the PS registration numbe .
You can also keep pressing NEXT until the desired PS registration number is displayed.
Display example: PS01:12
4.
Enter the doorphone number.
To not assign a doorphone, press CLEA .
To change the current entry, press CLEAR and enter the new doorphone number.
5.
Press STORE.
6.
To programme another PS, press NEXT or PREV, or SELECT and the desired PS
registration number.
7.
Repeat steps 4 through 6.
8.
Press END.
Conditions
• For the KX-TD1232, doorphone 1, 2 are installed in the Master System and 3, 4 in the
Slave, if available.
• You can enter two (KX-TD816) or up to four (KX-TD1232) doorphone numbers for each
extension.
DECT Programming
5.3 Extension Programming
369

Advertisement

Table of Contents
loading

This manual is also suitable for:

Kx-td1232

Table of Contents