1.2 Using Proprietary Telephones
You can use either the soft buttons or the overlay buttons. (For overlay buttons, refer to "Using
the Overlay" below.)
Throughout programming you will see instructions such as "Press PREV". If you use soft
buttons, this means press SHIFT, release SHIFT and then press Soft 3. The (PREV) function
is performed.
Note
If you use soft buttons and if programming instructions tell you to press the following buttons,
you may press soft buttons shown below.
Instructions
SELECT
CLEAR
Using the Overlay
A programming overlay is packed with the telephone at the factory. This overlay should be
used at all times while in programming mode since the functions of the telephone keys change
while in programming mode as follows: (The original functions are in parentheses.)
During Normal Operation
(AUTO ANSWER / MUTE)
(AUTO DIAL / STORE)
12
Soft button
SEL+, SEL-, or SEL
CLR
(PAUSE)
(SP-PHONE)
(REDIAL)
(FLASH)
(TRANSFER)
(FWD/DND)
(CONF)
(INTERCOM)
(HOLD)
During Programming
PAUSE / PROGRAM
NEXT
PREV (PREVIOUS)
SELECT
FLASH
CLEAR
— /
SECRET
STORE
END
Programming Instructions