2.6 COS Programming
[509] O ff-Hook Call Announcement (OHCA)
Description
This programme determines which Class of Service (COS) are allowed to perform the Off-
Hook Call Announcement (OHCA) function.
Selection
• COS number: 1 through 8,
• Enable / Disable
Default
All COS – Enable
Programming
1.
Enter 509.
Display: OHCA
2.
Press NEXT.
Display: COS NO?
3.
Enter a COS number.
To enter COS number 1, you can also press NEXT.
Display example: COS1:Enable
4.
Keep pressing SELECT until the desired selection is displayed.
5.
Press STORE.
6.
To programme another COS, press NEXT or PREV, or SELECT and the desired COS
number.
7.
Repeat steps 4 through 6.
8.
Press END.
Conditions
• To assign all COS to one selection, press the
the contents programmed for COS 1.
Features Guide References
Off-Hook Call Announcement (OHCA)
Whisper OHCA
172
( =all COS)
key in step 3. In this case, the display shows
General Programming