Table of Contents
Advertisement
Chapter 2. Installing the Pipe Nozzles
2.4.6 Installing the Second Welding Boss and Nozzle MR2 Mid-Radius
Install the second welding boss and nozzle at the marked position (see Figure 64 below) as described in "Installing the
First Welding Boss - MR2 Mid-Radius" on page 47 and "Installing the First Nozzle - MR2 Mid-Radius" on page 50.
Top View
Figure 64: Installing the Second Welding Boss and Nozzle
The completed installation should appear as shown in Figure 65 below.
Nozzle (2 places)
Welding Boss (2 places)
45º
Flow
Top View
End View
Figure 65: Completed MR2 Mid-Radius Installation
52
Model T17 Installation Guide
Advertisement
Table of Contents
