CCS Technical Documentation
Reprogramming NHM-1
For programming using the FPS-8, remove SIM and attach the FLA-25 adapter or con-
nect to MJF-11/JBV-1 as shown in the FPS-8 Flash setup above.
Updating Software
The following procedure can be used for updating the phone software.
•
Open Phoenix
Choose File - Manage connections
•
Set the required connection method to the top of the priority list and Apply
•
Select Flashing and choose either: FPS-8 Flash or FLS-4 Flash depending on
•
connection method
The Flash window will open.
To restore the user data after the phone has been flashed select Restore User Phone. If
you wish to delete all the user data and return the phone to manufactured state, select
Phone as Manufactured.
Select the required Image File and PPM File using Browse... buttons on the
•
Flash File Selection window. If Phone as Manufactured has been selected, enter
the Content File path.
Do not select an ADSP File.
•
Issue 1 11/03
Company confidential
Nokia Corporation.
NHM-1
Page 45