Bosch Rexroth Hagglunds DUc MS2 Installation & Maintenance Manual page 11

Safety instructions | Hägglunds DUc Drive unit
Escaping oil mist
Risk of explosion, fire, health hazard, environmental pollution.
▶ Depressurize the machine/system and repair the leak.
▶ Keep open flames and ignition sources away from the Hägglunds Drive Unit.
High voltage
Danger to life or personal injury hazard through electrical shock.
▶ Prior to accessing electrical parts with a voltage higher than 50 volts always
disconnect the device from the mains or power unit. Secure the electrical
equipment against being switched on again by accident.
▶ Observe the general deployment regulations, safety regulations and domestic
laws for work on heavy-current equipment.
▶ The operation, maintenance and/or repair of such equipment is reserved to
skilled personnel qualified to work on or with electrical equipment.
▶ Prior to switching the equipment on always check the protective earth
conductor for reliable connection to all electrical equipment according to the
connection diagram.
▶ Exclusively run the component/device - even for short-time measurements or
tests - with the protective earth conductor reliably connected to the dedicated
connection points.
Danger due to incorrect mounting and setting of electrical, hydraulic and
mechanical functions as well as controls
Risk of personal injury or property damage.
▶ Follow instructions for delivered equipment.
Rotating parts
Risk of injury or serious injuries.
▶ Do not touch rotating parts or in the zone of rotating parts.
WARNING
RE 15326-WA, Version 06.2020, Bosch Rexroth AB
11/88