Figure 330 Enabled Mpt-Hc Odu On P8Eth Optical Ethernet Port - Nokia 9500 MPR User Manual

Release 7.0.0 3DB 19286 ACAA Issue 01
Enable equipment
Figure 330 Enabled MPT-HC ODU on P8ETH optical Ethernet port
5.
To enable an auxiliary card
1. Select MSS-8/Slot#8 or MSS-4/Slot#4 in the resource tree area where the
514
Caution: When parallel radio paths exist between two MSS shelves, port
segregation should be provisioned between the parallel radio paths at both ends
to prevent a loss of traffic.
Verify port segregation provisioning. Port segregation should be provisioned
between parallel MPT ODU radio paths at both ends when they exist on the NE.
Port segregation should be provisioned between the MPT ODU port and other
Ethernet and/or radio ports where connectivity is not desired. See
segregation/connectivity
Auxiliary card will be enabled. The selected slot will highlight in blue. This
selection also highlights the selected slot in blue on the graphical representation
of the MSS shelf in the resource list area. See
for detailed steps to view/provision port segregation.
Figure
WebEML User Manual
Provision port
331.