Release 7.0.0 3DB 19286 ACAA Issue 01
Provision Ethernet ports
To provision provider bridge parameters
1. Provision Provider Bridge parameters using the following procedure. See
Figure 243
Provision provider bridge
a
b
c
c
c
d
418
d. Click on the Apply button.
Figure
243.
a. Select Ethernet Port#n to provision (Ethernet Port #1/#6).
b. Select Provider Bridge tab.
c. Choose the port type: NNI, UNI (port-based), or UNI (VLAN-based).
d. Configure port type parameters:
• for NNI, choose the S-VLAN TPID from the drop-down menu:
• for UNI (port-based), choose Port Priority or C-VLAN Priority:
• for UNI (VLAN-based), configure C-VLAN/S-VLAN mapping and
egress settings, see
e
Figure
244.
WebEML User Manual
d
d
23193