Chapter 4. Printing Data; Data Types For Printing - GE DigitalFlow XGS868i Programming Manual

Chapter 4. Printing Data

4.1 Data Types for Printing

The Model XGS868i flowmeter has no ability to print any of its data directly. However, any of the data stored in its
memory may be printed via the built-in RS232 communications port, using a computer terminal. In order to use the
capability, the XGS868i must be linked to the computer terminal with the optional PanaView software.
Note: See Chapter 1, Installation, of the Startup Guide for instructions on wiring the RS232 serial port. For
additional information, refer to the EIA-RS Serial Communications Manual (916-054).
After making the hardware connections and installing PanaView software, the following data may be output to a printer
connected to the personal computer:
•
live data in numeric or graphical format
•
log file in numeric or graphical format
•
site file in tabular format
•
transducer signal array data in tabular format
For detailed instructions on printing any of the data types listed above, consult the PanaView User's Manual.
DigitalFlow™ XGS868i Programming Manual
Chapter 4. Printing Data
69