Chapter 3. Logging Data; Introduction; The Data Logging Option Card; Logging Via Panaview - GE DigitalFlow XGS868i Programming Manual

Chapter 3. Logging Data

3.1 Introduction

The XGS868i offers two options for logging data:
•
If the Model XGS868i flowmeter is equipped with an optional data logging card in
recorded and stored in this memory in the form of a log file. After the specified data has been logged, the log file
may be uploaded to PanaView via the RS232 link.
•
PanaView can also create PC log files for storage on the PC's hard drive.
This chapter explains how to use the Model XGS868i's data logging capability with PanaView.

3.2 The Data Logging Option Card

In order to log data, the Model XGS868i must be fitted with an optional data logging option card in
4, Parts Replacement, of the Service Manual for instructions on installing the card.

3.3 Logging via PanaView

PanaView is capable of creating and viewing log files of the following types:
•
meter logs - log files stored in the XGS868i memory, as discussed above
•
PC logs - log files stored on your PC's hard drive (page 66)
To create or view logs of the above types, proceed to the appropriate section of this chapter.
DigitalFlow™ XGS868i Programming Manual
Chapter 3. Logging Data
Slot 2
, flow rate data can be
Slot 2
. See Chapter
55