70
en | RADION smoke
Notice!
To avoid a fire department dispatch, contact the remote
monitoring station or put the control panel into the
corresponding test mode before performing this test.
12.5
LED
LED
Flashing
ON
OFF
Tab. 12.16: LED
12.6
Clean the detector and replace the optical
chamber
Clean the detector cover with a dry or damp cloth as needed to
keep it free from dust and dirt. Clean the detector interior at
least yearly.
Cleaning the detector:
1.
2.
3.
Figure 12.2: Remove the detector cap
2020.05 | 13 | F.01U.261.834
Status
Flashes every 8 sec under normal operation.
Detects smoke, sending an alarm.
Malfunction, replace the batteries, clean the
detector, or replace the optical chamber as
required.
Remove the detector from the mounting base.
Remove the batteries.
Slide a slotted screwdriver into the slot on the detector cap
and gently push down to pry off the cap.
RADION receiver SD
Bosch Security Systems B.V.