Wall Tamper Switch Installation - Bosch RADION B810 Installation Manual

10 en | General installation
Figure 2.1: Insert for the receiver and repeater
Figure 2.2: Insert for the bill trap
2.3

Wall tamper switch installation

RADION transmitter devices contain a feature that activates the
wall tamper switch located on the base of the device. In order to
properly install the device, you must consider the following:
–
–
2020.05 | 13 | F.01U.261.834
To properly install a device with active wall tamper
functionality, insert a screw in the designated screw slot
location.
Failure to insert a screw into the wall tamper slot prevents
the wall tamper feature from generating a tamper signal
when the transmitter is pulled away from a wall.
RADION receiver SD
Bosch Security Systems B.V.