1.1.1.7
Intercept Routing—No Destination
Description
Provides automatic redirection of incoming trunk calls that do not have a destination assigned. The intercept
destination is an operator (tenant/PBX) (→ Operator Assignment [006] *For PBX operator only).
Conditions
•
Intercept Routing—No Destination on/off
The Intercept Routing—No Destination feature can be enabled or disabled through system
programming.
If disabled, a reorder tone will be sent to the caller. However, the Intercept Routing—No Destination
feature always functions for calls through the LCOT or T1 (LCOT/GCOT) card even when disabled.
•
If an operator (tenant/PBX) is not assigned:
The extension connected to the lowest-numbered jack will be the intercept destination.
•
Intercept Routing—No Destination also applies to calls from doorphones.
Feature Guide References
2.2.5 Operator Features
1.1 Incoming Call Features
Feature Guide
35