Bosch Access Easy Controller Hardware Manual page 80

80 en | Configuring a Web Browser to Work with Access Easy Controller
12. Enter the Access Easy Controller's IP address in the browser's Address box as shown
13. Press the Enter key or click
14. Proceed to login using the default user id: USER1 and password: 8088. Upon successful
15. From the home page, select Panel Admin, Panel Setup. The Network Settings page
16. After the database has been saved, reboot the controller. It will now boot using the new
NOTICE!
i
For detailed information on database configuration, refer to the Access Easy Controller Soft-
ware User Manual.
Ver 2.0.0 | 2006.07
above.
page.
login, the controller's home page will be displayed.
should be displayed. Make any needed changes to configure the controller for operation
on the customer's network. Click Save to store the changes.
IP address. The controller is now ready to be connected to the customer's network.
Hardware Manual
. This should display the Access Easy Controller's login
Access Easy Controller
Bosch Security Systems