Bosch Access Easy Controller Hardware Manual page 18

18 en | Is Access Easy Controller the Correct Choice for Your Client?
4.
5.
6.
7.
8.
_______ Yes
_______ No. Go to step 2.8
Congratulations! By answering all questions with a "Yes" response, you have validated that
the Access Easy Controller is the proper access control solution for your customer. A few final
pieces of information will be needed from the customer to schedule the installation of the
Access Easy Controller. This information is needed so that the controller can be configured
and setup prior to connection on the customer's network. The information includes:
Ver 2.0.0 | 2006.07
The wall jack or hub port that will be used for connection of the Access Easy Controller
to the customer's network must be located within 100m cabling distance from the loca-
tion where the Access Easy Controller will be installed. Is the network termination point
located within 100m of the Access Easy Controller?
_______ Yes
_______ No. Go to step 2.4
The Access Easy Controller communicates using TCP/IP protocol. Does the customer's
network support TCP/IP protocol?
_______ Yes
_______ No. Go to step 2.5
To manage the Access Easy Controller's database, at least one computer on the cus-
tomer's network must be configured to support TCP/IP communication. Does the cus-
tomer have at least one computer on the network that is configured for TCP/IP?
_______ Yes
_______ No. Go to step 2.6
The person responsible for managing the Access Easy Controller's database will do so by
using a standard Web browser, such as Microsoft Internet Explorer or Netscape Naviga-
tor, to communicate with the controller. Does this person's computer have an opera-
tional Web browser on it?
_______ Yes
_______ No. Go to step 2.7
The Access Easy Controller will require a static IP address. Is the customer's network
capable of supporting static addresses?
Hardware Manual
Access Easy Controller
Bosch Security Systems