Applicable Standards / Regulations; Confirmation Of Packed Contents - Panasonic SF2B Series Instruction Manual

1-3 Applicable Standards / Regulations

This device complies with the following standards / regulations.
<EU Directives>
EU Machinery Directive 2006/42/EC
EMC Directive 2004/108/EC (Valid until April 19, 2016)
EMC Directive 2014/30/EU (Valid from April 20, 2016)
RoHS Directive 2011/65/EU
<European Standards>
EN 61496-1 (Type 2), EN 55011, EN 50178, EN ISO 13849-1: 2008 (Category 2, PLc)
<International Standards>
IEC 61496-1/2 (Type 2), ISO 13849-1: 2006 (Category 2, PLc), IEC 61508-1~7 (SIL1)
<Japanese Industrial Standards (JIS)>
JIS B 9704-1/2 (Type 2), JIS B 9705-1 (Category 2), JIS C 0508 (SIL1)
<Standards in US / Canada>
ANSI/UL 61496-1/2 (Type 2), ANSI/UL 508, UL 1998 (Class 1)
CAN/CSA C22.2 No.14, CAN/CSA C22.2 No.0.8
<Regulations in US>
OSHA 1910.212, OSHA 1910.217(C) (Note), ANSI B11.1 to B11.19, ANSI/RIA 15.06
Regarding EU Machinery Directive, a Notified Body, TÜV SÜD, has certified with the type ex-
amination certificate.
With regard to the standards in US / Canada, a NRTL, UL (Underwriters Laboratories Inc.) has
certified for UL Listing Mark.
C US
Note: In case of using the bottom cap cable (SF2B-CB05-A) (optional), this device does not conform to OSHA.
<Reference>
The conformity to JIS, OSHA and ANSI for this device has been evaluated by ourselves.
The UL Listing Mark
C US
This device conforms to the EMC Directive and the Machinery Directive. The
indicates that this device conforms to the EMC Directive.
● In Japan, never use this device as a safety equipment for any press machine or
shearing machine.
● When this device is used in a place other than the places shown above, be sure
to confirm the standards or regulations applicable in each region or country be-
fore use

1-4 Confirmation of Packed Contents

□ Sensor: Emitter, Receiver
□ Test Rod
SF2B-H□: SF2B-TR27 (ø27 × 220mm)
□ Intermediate Supporting Bracket (MS-SF2B-2)
Note: The intermediate support bracket (MS-SF2B-2) is enclosed with the following devices. The quantity differs
depending on the device as shown below:
1 set: SF2B-H□ ... 40 to 56 beam channels, SF2B-A□ ... 20 to 28 beam channels
2 sets: SF2B-H□ ... 64 to 80 beam channels, SF2B-A□ ... 32 to 40 beam channels
3 sets: SF2B-H□ ... 88 to 96 beam channels, SF2B-A□ ... 44 to 48 beam channels
□ Instruction Manual (this manual)
© Panasonic Industrial Devices SUNX Co., Ltd. 2016
Ramco Innovations | www.ramcoi.com | 800-328-6236 | nsales@ramcoi.com
indicates compliance with both Canadian and US requirements.
mark on the main body
1 pc. each
1 pc.
0 to 3 sets
1 pc.
9