Part Description - Panasonic SF2B Series Instruction Manual

2-2 Part Description

Emitter
<Emitter>
It emits light to the receiver facing it. Furthermore, the status of the emitter and the receiver is
indicated on its display section.
<Receiver>
It receives light from the emitter facing it. Simultaneously, it turns ON the control output (OSSD
1 / 2) when the all beam channels receive light from emitter, and it turns OFF the control output
(OSSD 1 / 2) when one or more beam channels are blocked light.
Besides, the receiver displays its status on the display section.
<Beam channel>
The light emitting elements of the emitter and the light receiving elements of the receiver are
placed at the following intervals, 20mm (SF2B-H□), and 40mm (SF2B-A□).
<Standard mounting bracket (optional)>
This bracket is to be used for mounting the emitter / receiver. It enables to adjust the horizontal
mounting angle using the standard mounting bracket.
<Intermediate supporting bracket>
This bracket is to be used for mounting the device having 40 beam channels or more for
SF2B-H□, 20 beam channels or more for SF2B-A□.
© Panasonic Industrial Devices SUNX Co., Ltd. 2016
Ramco Innovations | www.ramcoi.com | 800-328-6236 | nsales@ramcoi.com
Receiver
Beam
channel
Display
section
Bottom cap
cable
(Optional)
<Standard mounting bracket (Optional)>
<Intermediate supporting bracket (Accessory)>
For rear mounting For side mounting
11