Cleaning The Machine; Cleaning The Control Panel; Cleaning The Door And The Door Seal; Cleaning The Wash Cabinet - Miele PG 8581 Operating Instructions Manual

Cleaning the con-
trol panel
Cleaning the door
and the door seal
Cleaning the
wash cabinet
Cleaning the door
front
Preventing resoil-
ing

Cleaning the machine

 Never clean the machine with a water hose or a pressure
washer.
 Do not use cleaning agents containing ammonia or thinners on
stainless steel surfaces!
These agents can damage the surface material.
 Do not use any abrasive materials or general-purpose cleaners
to clean the control panel.
These can cause considerable damage to the glass and plastic sur-
faces and to the onset control buttons.
Clean the control panel with a damp cloth and a small amount of

dishwashing solution or with a non-abrasive stainless steel cleaner.
Proprietary glass or plastic process chemicals can also be used to

clean the display.
For surface disinfection, use a listed agent recommended by the

manufacturer.
Wipe the door seals regularly with a damp cloth to remove any soil-

ing and stains.
Seals which are no longer tight or which have suffered damage
must be replaced with new ones by Miele Service.
Remove any stains from the door sides and hinges.

Regularly clean the groove in the base panel under the door with a

damp cloth.
The wash cabinet is generally self-cleaning. However, should a build-
up of deposits occur in the chamber, please contact Miele Service for
advice.
To clean the stainless steel front, use a damp cloth with a small

amount of dishwashing solution and hot water, or with a non-abra-
sive process chemicals for use on stainless steel.
To help prevent resoiling of stainless steel surfaces (fingerprints,

etc.), a suitable stainless steel conditioner can be used after clean-
ing.
Maintenance measures
105