7.3.13 Verifying the Hydran 201Ti Operation
1. Power up the H201Ti.
2. Perform the procedure described in Section 7.2.2.
7.4
Configuring the Hydran 201Ti
The H201Ti can be configured using either its keypad or a host computer running the
Hydran Host or Perception software (depending on the selected communication
protocol). It is recommended to use the Hydran Host or Perception software because the
configuration task is much easier. For details, see the Hydran Host Software Manual or
Perception User Manual.
The H201Ti's user interface is described thoroughly in Section 5.1. The parameter
verification detailed in the following pages is written for those who are using the
H201Ti's keypad.
Note: The values indicated in this Section are only given as an indication and may
differ from customer requirements. The value of the various parameters should be
Page 116
Hydran* 201i Instruction Manual
Figure 7-9: Installing the CPU Module
MA-033
Rev. 14.0, 12-Nov-18