Operating Instructions
•
Set up the IPsec policy as below.
Items
Protocol
Source Network
Source IP address
Destination Network
Destination IP address A global address of the camera
9.
Access the camera (see page 13).
•
If you can access the camera, the IPsec setup is complete.
Note
•
In IPsec communications, "IPsec" is displayed on the Top page or the
Single Camera page.
•
If you cannot communicate using IPsec, see page 24 of the
Troubleshooting on the CD-ROM.
•
See the Panasonic Network Camera support website at
http://panasonic.co.jp/pcc/products/en/netwkcam/ for IPsec features.
66
ANY
Network address and subnet mask on the LAN side of
the VPN router
A global address on the WAN side of the VPN router
A global address of the camera
Settings