Panasonic CQ-DF602U Operating Instructions Manual page 109

5.
Set the Lens Position When Triggered setting, and click [Next>].
• Clicking [<Back] takes you back to the previous page.
• Clicking [Cancel] takes you back to the Trigger page without saving
changes.
Note
• If you enable the Lens Position When Triggered setting, buffer/transfer of
the post-trigger image starts after the camera turns to the specified
position.
Setting
Lens Position
When Triggered
6.
Set the image settings, and click [Next>].
• Clicking [<Back] takes you back to the previous page.
• Clicking [Cancel] takes you back to the Trigger page without saving
changes.
Setting
Image
Resolution
• Set the direction to move the lens to the home position,
alarm position (see page 30) or Preset 1–20 (see page 31)
when an alarm signal is detected.
• Select an image resolution (640 x 480, 320 x 240 (default)
or 160 x 120 pixels) for the buffer/transfer.
Description
Description
Operating Instructions
109