Bosch Conettix B465 Installation And Operation Manual page 54

54 en | Configuration and Diagnostics
Download firmware
Notice!
Down load the latest B465 firmware first
No changes to the firmware occur if the downloaded firmware version is the same version as
the current version installed on the B465.
Notice!
B465 firmware v1.00.005 supports the latest versions of the B440 and B441 plug-in cellular
modules (B440 v15.00.026 and B441 v18.02.022)
The latest B440/B441 firmware includes updated libraries to maintain Verizon certification.
Before inserting the B440/B440-C or B441/B441-C cellular communication module that
contains a Technical Service Note, verify your B465 is updated to the latest firmware version.
If you plug in B440 v15.00.026 and B441 v18.02.022 without having the B465 firmware
v1.00.005 or higher installed, the B465 registers on the network but will not obtain an IP
address or send data.
Update with the USB interface and Tera Term
To update the B465 using the USB interface and Tera Term, follow the steps below.
1.
2.
3.
Figure 6.11: B465 USB login window
4.
5.
2017.11 | 05 | F.01U.311.207
Ensure that the USB cable is connected to the B465 and the target PC or laptop.
From Windows, start a terminal session by launching Tera Term.
Log into the USB interface as described in Log into the USB interface, starting at step 3,
and continuing through to step 6. The B465 USB login window appears, listing the current
software version and build.
Select option 8 Maintenance.
Select option 5 Firmware Update and press [Enter].
Installation and Operation Manual
Conettix Universal Dual Path Communicator
Bosch Security Systems, Inc.