Drive Advanced States (Advanced Status) - GE AV-300i User Manual

I/O status
DI 7654321E
00000000
DO
DIX BA9876543210
000000000000
DOX 76543210
00000000

1.2.3 Drive Advanced States (Advanced Status)

Advanced Status
DC link voltage
Magnetizing curr
Torque curr
Magn curr ref
Torque curr ref
Flux ref
Flux
Mot OL accum %
BU OL accum %
Drv OL accum %
Norm Std enc spd
Norm Exp enc spd
Std enc position
Exp enc position
Std sin enc mod
HT sensor temp
RG sensor temp
IA sensor temp
Sequencer status
CPU1 runtime
CPU2 runtime
The drive State Machine, controls the drive running and starting, accounting for protection & alarming, command
sequence, and reset status.
The waiting phase for the State Machine reset is showed in the Alarm List as Sequencer. The table below
displays various operation states by Sequencer status number. See section 1.12.2 , Alarm state for more details.
Ch.1
26
Standard digital inputs
Standard Digital outputs
3210
0000
Expanded digital inputs
Expanded digital outputs
Drive DC link voltage
Drive magnetizing current in Amps
Drive torque current in Amps
Magnetizing current reference in Amps
[S,F]
Torque current reference in Amps
[S,F]
Drive flux reference in Webers
[S,F]
Flux in Webers
[S,F]
Accumulated timer counts of the motor I2t
Accumulated timer counts of the Scale Unit (BU) I2t
Accumulated timer counts of the Drive I2t
Standard encoder speed (Std)
Expanded encoder speed (Exp)
[F]
Raw accumulated encoder pulses (counts) of the Std encoder
[F]
[F] Raw accumulated encoder pulses (counts) of the Exp encoder
Module of sinusoidal encoder, "A" and "B" trace
Heatsink temperature °C
Temperature on the regulation card °C
Temperature of the heatsink incoming air temperature (available
from the size...)
Sequencer status (State machine) see table below for status
Time needed by the CPU1 (microprocessor)
Time needed by the CPU2 (microprocessor)
Sequencer status
1 Magnetization running
2 Magnetization completed, Stop
3 Start
4 Fast stop, Stop
5 Fast stop, Start
9 No alarm, drive is ready to accept all commands
10 Magnetization running and Start command already present
12 Alarm active
16 Alarm not active, waiting for reset
—————— Function Description ——————
GEH-6641E
State
TAV3i020